EPS@ISEP | The European Project Semester (EPS) at ISEP

Differences

This shows you the differences between two versions of the page.

--- log [2014/05/08 10:38] – [8th Meeting (2014-05-07)] team1
+++ log [2022/11/03 10:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ======Logbook======
 ===== Weekly Report =====
-==== 1st Week Report (CW 9) ====
+==== 1st Week Report (Calendar Week (CW) 9) ====
 Introduction into the European Project Semester, courses, teams and proposal of projects. Discussion within the group and with coaches/professors, introduction into the workplaces and final choice of project.
@@ Line 27: / Line 27: @@
 ==== 10th Week Report (CW 18)====
 Work on final report
+==== 11th Week Report (CW 19)====
+Detailed product development, continue deliverables
+==== 12th Week Report (CW 20)====
+Finish electronic circuit, Finish Marketing Plan
+==== 13th Week Report (CW 21)====
+Work on final report
+==== 14th Week Report (CW 22)====
+Finish final details for 3D printable parts, Finish Project Management chapter
 ===== Meetings =====
@@ Line 206: / Line 218: @@
   - How can we calculate the final product costs?
   - Should we include European standardized tests, e.g. CE, into our product development?
+=== Minute: ===
+  - detailed technical drawings should be handed in as soon as possible
+    * body (back fin segments, caps, etc.)
+    * control circuit (use 123D Circuit; 123D Apps to simulate the control circuit!)
+  - supervisors shared their expectations
+  - Terms of warranty should be done according to EU standards (2 years)
+  - a user´s manual should be provided including safety instructions, also user´s videos for standard operations could be helpful
+  - inspiration on the product packaging was given (like a sardine can?)
+  - cost assessment
+    * at least the costs of prototype development can be assessed (materials, design&development, production, labour cost)
+    * ask marketing teacher about price drop down to final product
+    * production quantity is probably required -> find reliable measures of quantities of sale or create a scenario
+    * product costs should preferably not exceed 40€ (in Manuel´s opinion)
+==== 9th Meeting (2014-05-15) ====
+=== Agenda: ===
+  - when can we start working on the prototype? Are the materials here?
+  - present the newest design
+  - presentation of technical drawings
+    * are the drawings detailed enough?
+    * dimensions problems in some parts
+  - presentation of electronic circuits and quick overview of electronics
+=== Minute: ===
+  - materials have not yet arrived
+  - technical drawings will be discussed in another meeting appointed with Manuel
+  - architecture of tail was discussed, especially methods to create a streamline surface, a solution is not yet found
+  - different materials to create the streamline were discussed, e.g. neoprene, mylar, dacron
+  - pins to connect tail segments should be made of stainless steel rather than plastics
+==== 10th Meeting (2014-05-22) ====
+=== Agenda: ===
+  - Presentation of current Mechanical Design
+  - Questions about EPS Calendar:
+    * Upload of final deliverables already at the 8th June??
+    * Does the presentation also need to be done by then?
+    * Do all team members need to be present at the final hand-in date (19th June)?
+    * What is the "Resit Assessment" for?
+  - Questions about contact details of Supervisors (information collected for report)
+=== Minute: ===
+  - whenever supervisors Manuel and Fernando give "green light" on designs, work in the workshop can start
+  - a better 3D printer (higher accuracy) was arranged, Fernando will forward the drawings
+  - discussion about required shape of shaft to propel the fish, this issue will have to be experimented on the prototype
+  - a spring, installed at the last segment of the tail fin, could maybe improve the tailmovement
+  - an appointment was set with Fernando to improve little details on the parts in order to make them printable
+  - the calendar on the wiki is right, google calendar had mistakes, the upload date is on 12th June
+  - presentation can be uploaded later, one day before presentation day
+  - contact data of professionals at ISEP can be found in ISEP Portal
+==== 11th Meeting (2014-05-28) ====
+=== Agenda: ===
+  - Questions about list of material (concerning electrical parts)
+=== Minute: ===
+  - materials have not yet arrived
+  - there are problems with the procurement of battery and 3D prating wire, supervisors will take of that
+  - 3D printing can start as soon as last technical details are discussed with Fernando and implemented into the 3D model
+  - the team has to buy some of the components itself, therefore some of the budget was made available for us
+  - Video and poster can be uploaded together with presentation on 18th June
+==== 12th Meeting (2014-06-05) ====
+=== Agenda: ===
+  - Question about content of wiki
 ==== Activities ======
@@ Line 215: / Line 292: @@
 | 2014-03-17 | 2014-03-19 | Marketing concept | Brainstorm/Research/Discussion | all|
 | 2014-03-20 |  | product development, report | the architecture was developed and components chosen, the report was prepared for the interim assessment | all |
+| 2014-05-12 | 2014-06-03 | Finish technical product development | prepare the 3D model so that parts can be printed, discuss details with Fernando | Marcin |
+| 2014-05-19 | 2014-05-31 | Finish part of Project Management for Report | elaborate all issues and send file to teacher by 31th May | Magda |
+| 2014-05-30 | 2014-06-02 | Project Management Presentation | Prepare a commercial presentation (format based on the interim assessment) | Alicia |

Trace:

Differences

Search

Navigation

Print/export

Tools

QR Code